iiyama T2452MSC-B2AG 24-inch Touch monitor
Full HD resolution, optical bonding PCAP touch technology and 420 cd/m².
Added to your basket
Product specification
The iiyama T2452MSC-B2AG is a 24-inch touch monitor. The Full HD resolution defines the native picture format, while the stated 420 cd/m² output gives you a brightness figure to compare with the ambient light at the installation. The 1 × HDMI inputs make it easier to plan how the required local sources will connect.
Buying checks
- Touch compatibility: Multi-touch requires a supported operating system. Check the intended host operating system and touch connection before ordering.
- Screen rotation and stand tilt: Use normal landscape screen rotation only, with the power indicator on the illustrated bottom edge. Portrait and inverted landscape are prohibited. The supplied stand separately tilts 90° upwards to 5° downwards, including its illustrated face-up endpoint; this is not permission for unsupported face-up enclosures or automatic content rotation. Hold the stand, avoid touching the LCD and keep fingers clear when adjusting it.
- Mounting and ventilation: The wall, ceiling or desktop arm must support the display and mount. Use four M4 × 12 mm total-length screws with the stated approximately 2.5 mm bracket thickness; this is not 12 mm chassis insertion. Tighten and secure all screws; longer screws risk electrical contact, damage or electric shock. Keep at least 10 cm wall clearance and vents clear. Removing the stand can block rear vents; do not lay the cabinet on its back, side, upside down or soft material. The stand tilt diagram does not waive cooling or support requirements.
- Touch operating systems: The exact manual marks Windows 7/8/8.1/10/11 digitizer and application-supported gestures, but not mouse mode. Vista supports digitizer only; XP supports mouse mode only. Linux mouse support depends on the OS version, without digitizer or gesture support. Mac OS/OS X and Android mark all three functions unsupported; unlisted OS versions are unsupported. The 10-point hardware capacity and display Plug & Play note do not establish touch support on an unlisted host.
- Dual-screen touch: Set up the primary monitor first using Tablet PC Settings, then connect and configure the second monitor. Only one monitor can receive touch operation at a time; the manual does not support simultaneous touch on both displays.
- Touch, video and power connections: Connect the separate USB upstream cable as well as HDMI or DisplayPort video to the host. The USB 3.2 Gen 1 hub is 5 Gbps, DC 5 V/900 mA, with one Type-B upstream and two Type-A downstream ports, not USB-C video or laptop charging. Switch the host and monitor off before connecting; connect power to the monitor before the power source. Incorrect connections can damage both devices. Use protective earth and a nearby accessible socket; the manual specifies a 120/240 V, 20 A maximum circuit breaker. Excessive headphone volume can damage hearing, and operation of other devices on the headphone connector is not guaranteed.
- Included equipment: The package lists power, HDMI and USB cables, stand neck with a screw, stand base, two base thumb screws, screwdriver, Safety Guide and Quick Start Guide. The illustrated DisplayPort cable is not included; the illustrated computer and peripherals are not included equipment. Use the supplied approved power cable, at least H05VVF, 3G, 0.75 mm²; the manual excludes problems or damage caused by a non-supplied cable from its guarantees and warranties.
- Confirm refresh rate and brightness: The AG manual specification states Full HD at 60 Hz, while its product page states 120 Hz. The same manual lists 344 cd/m² through touch in its AG features and 360 cd/m² through touch in the specification; 420 cd/m² is bare-panel brightness and 250 cd/m² is the default energy-saving setting. Confirm these two specifications before relying on them. The manual lists 14 ms typical response; 5 ms grey-to-grey applies only with OverDrive set to 5. Non-AG model figures do not resolve the AG differences.
- Care and usage limits: This product is not specifically designed for 24/7 use in all environments. Avoid direct sun, sudden temperature changes and humid, dusty or smoky locations. Switch off and unplug before cleaning. Use a soft, dry, clean cloth; for a dirty cabinet use very dilute mild detergent on a tightly wrung cloth and immediately dry. Do not spray or wipe alcohol/disinfectants on the display, use strong solvents, glass cleaner, abrasives or cleaning sheets, or scratch/rub the touch surface. Dry droplets immediately and avoid prolonged rubber/plastic contact. The manual recommends disinfecting hands away from the display and warns against frequent alcohol disinfection. If liquid enters, unplug immediately and contact the dealer or service centre.
- Environment, power and net weight: Operate at 5–35°C and 10–90% humidity, non-condensing. The −20–60°C and 10–90% humidity figures are storage limits, not operating limits. The 5.6 kg figure is net weight, not packaged delivery weight. Typical 18 W power excludes connected USB devices; standby is 1.5 W maximum and off mode 0.3 W maximum.
Technical specifications
| Product type | Touch monitor |
|---|---|
| Screen size | 24-inch |
| Native resolution | Full HD |
| Brightness | 420 cd/m². The AG manual specification states Full HD at 60 Hz, while its product page states 120 Hz. The same manual lists 344 cd/m² through touch in its AG features and 360 cd/m² through touch in the specification; 420 cd/m² is bare-panel brightness and 250 cd/m² is the default energy-saving setting. Confirm these two specifications before relying on them. The manual lists 14 ms typical response; 5 ms grey-to-grey applies only with OverDrive set to 5. Non-AG model figures do not resolve the AG differences. Operate at 5–35°C and 10–90% humidity, non-condensing. The −20–60°C and 10–90% humidity figures are storage limits, not operating limits. The 5.6 kg figure is net weight, not packaged delivery weight. Typical 18 W power excludes connected USB devices; standby is 1.5 W maximum and off mode 0.3 W maximum. |
| Touch input | 10-point touch. Multi-touch requires a supported operating system. The exact manual marks Windows 7/8/8.1/10/11 digitizer and application-supported gestures, but not mouse mode. Vista supports digitizer only; XP supports mouse mode only. Linux mouse support depends on the OS version, without digitizer or gesture support. Mac OS/OS X and Android mark all three functions unsupported; unlisted OS versions are unsupported. The 10-point hardware capacity and display Plug & Play note do not establish touch support on an unlisted host. Set up the primary monitor first using Tablet PC Settings, then connect and configure the second monitor. Only one monitor can receive touch operation at a time; the manual does not support simultaneous touch on both displays. |
| Touch method | optical bonding PCAP |
| HDMI inputs | 1 × HDMI |
| VESA mount | 100 × 100 mm |
| Dimensions | 567 × 385 × 253.5 mm (W × H × D) |
| Product weight (without box) | 5.6 kg. Operate at 5–35°C and 10–90% humidity, non-condensing. The −20–60°C and 10–90% humidity figures are storage limits, not operating limits. The 5.6 kg figure is net weight, not packaged delivery weight. Typical 18 W power excludes connected USB devices; standby is 1.5 W maximum and off mode 0.3 W maximum. |
| Shipping weight | 7.1 kg |
| Packaging dimensions | 635 × 405 × 143 mm (W × H × D) |
Product specifications
Use the detailed specifications below to compare this model and check it against your requirements.
EAN: 4948570127245
| Features | |
|---|---|
| Screen Size | 24 Inch |
| Colour of product | Black |
| Touch Screen | Yes. Multi-touch requires a supported operating system. The exact manual marks Windows 7/8/8.1/10/11 digitizer and application-supported gestures, but not mouse mode. Vista supports digitizer only; XP supports mouse mode only. Linux mouse support depends on the OS version, without digitizer or gesture support. Mac OS/OS X and Android mark all three functions unsupported; unlisted OS versions are unsupported. The 10-point hardware capacity and display Plug & Play note do not establish touch support on an unlisted host. Set up the primary monitor first using Tablet PC Settings, then connect and configure the second monitor. Only one monitor can receive touch operation at a time; the manual does not support simultaneous touch on both displays. |
| Resolution | 1920 x 1080 Pixels |
| Refresh Rate | 120 Hz |
| Compatible with VESA-wall mounting system | 100 x 100 mm |
| Speakers | 2 x 1W |
| Interface | IPS |
| HDMI ports quantity | 1 |
| Dimensions With Stand (W x H x D) | 567 x 385 x 253.5 mm |
| Product weight (without box) | 5.6 kg. Operate at 5–35°C and 10–90% humidity, non-condensing. The −20–60°C and 10–90% humidity figures are storage limits, not operating limits. The 5.6 kg figure is net weight, not packaged delivery weight. Typical 18 W power excludes connected USB devices; standby is 1.5 W maximum and off mode 0.3 W maximum. |
Frequently asked questions
What mounting orientations does the T2452MSC-B2AG support?
Landscape and face-up. Follow the manufacturer installation guidance.
What touch capability does the T2452MSC-B2AG provide?
It supports up to 10 touch points. Multi-touch requires a supported operating system. Check the intended host operating system and touch connection before ordering.
What does the USB connection on the T2452MSC-B2AG support?
USB 3.2 Gen 1 (5 Gbps): one upstream Type B, two downstream Type A.
How many HDMI inputs does the T2452MSC-B2AG have?
It has 1 HDMI input.
What VESA mount does the T2452MSC-B2AG need?
It uses a 100 × 100 mm VESA fixing pattern. The product weight is 5.6 kg; choose a mount that supports both.
Supported mounting orientations
Useful documents
From iiyama
Related ranges
Business AV supply from Itelico AV
We supply commercial displays, professional AV hardware and account-based ordering for UK business customers.
- Trade account pricing
- UK business delivery
- Mounting and compatibility checks
- Order paperwork and account history