Philips 55BDL3511Q/00 55-inch Commercial display

Buying checks

• Size, mounting and optional stand: The 55-inch class has a 54.6-inch measured diagonal. Set dimensions are 1241.8 × 712.6 × 63.6 mm (width × height × depth), set weight is 16.6 kg and the mount is 400 mm × 400 mm, M6. The BM05922 stand is optional, not confirmed included; these are not packaged-weight figures or proof of a supplied stand.
• Leaflet power and energy label: The leaflet specifies 140 W typical consumption, 185 W maximum and standby below 0.5 W. Its energy label is G, whereas the older manual prints B without establishing the same label/test regime. Use the current applicable product label; do not combine those grades or treat typical, maximum, on-mode and annual figures as interchangeable. A 50,000-hour MTBF is not warranty duration or guaranteed service life.
• CMND and backup sources: CMND and Control operates over a local LAN. FailOver requires a configured list of alternate inputs and working backup content; it is not a guarantee against interruptions or proof of an included cloud subscription. SmartPlayer requires compatible content on USB and a configured playlist/schedule.
• Daily use and picture preset: Landscape and portrait are rated 18/7, not 24/7. D-Image is a DICOM Part 14-compatible picture preset; that does not establish approval for diagnostic medical use or a calibrated medical-grade display.
• Leaflet environment and warranty scope: The leaflet lists 0–40 °C operation, 20–80% RH without condensation, −20–60 °C storage, 5–95% RH storage without condensation and 0–3,000 m altitude. The separate manual safety/installation qualifications below must also be respected; the different storage/altitude limits are not silently reconciled. Its three-year warranty statement is subject to applicable local terms, not extra years of optional extended cover.
• Portrait installation and ventilation: Portrait mounting requires a 90° anticlockwise rotation, with the Philips logo on the right when facing the screen, and no more than 18 hours per day. Allow 100 mm ventilation at the top, rear and both sides. Use a separately obtained suitable wall kit, M6 screws 10 mm longer than bracket thickness and professional installation; incorrect installation damage is excluded. Two adults/technicians should handle it upright by the frame, not the glass.
• Environment and unresolved storage limits: Operate at 0–40 °C and 20–80% RH without condensation, away from direct sunlight, heat, oil, water and blocked vents; no unqualified outdoor or wet-location use is established. The manual’s safety absolute-rating table gives −20–65 °C storage and 5–90% RH, but its technical table and leaflets give −20–60 °C and 5–95% RH. Do not assume those different scopes authorise humidity above the safety limit. The installation text excludes 3,000 m and above while the tables include 3,000 m. Confirm the applicable storage/altitude limits. The safety table also gives 0–65 °C glass surface temperature; storage/shipment altitude up to 9,000 m is not operating altitude.
• USB roles and cover clearance: The two USB-A connections have different roles: one USB 2.0 connection is used for multimedia, while the USB service port is for firmware updates only. Do not assume two interchangeable playback ports, USB-C laptop power or touch. The recommended USB stick envelope under the cover for this exact size is 20 × 10 × 45 mm (width × height × length).
• Actual inputs and protected content: The actual terminal diagram/table has two HDMI inputs and one DVI-I input, with VGA via an adapter; the generic remote-button source list does not prove a DisplayPort socket or a video loop-through output. HDMI supports up to 3840 × 2160 at 60 Hz and LPCM audio only, at 48 kHz/two channels. HDCP 2.2 applies to HDMI 1/2 in HDMI 2.0 mode, not DVI or HDMI 1.4 mode; check the EDID setting and source chain.
• USB media compatibility: File extensions alone do not guarantee playback. The manual’s video table specifies MPEG-1/2, WMV3 and Motion JPEG at 1080p/30 fps/40 Mbps; H.264 rows specify 4096 × 2160/60 fps/135 Mbps and 1080p/30 fps/50 Mbps. JPEG/PNG/BMP pictures are limited to 3840 × 2160. MPEG Layer 1/2/3, AAC-LC/HEAAC and WMA audio have distinct sampling/channel/bit-rate limits in the manual; content above a listed limit may fail or stutter. This is not unrestricted codec or portrait-video playback support.
• Schedules and USB folder setup: Set the current date/time before programming up to seven schedules. A single non-repeating/one-day schedule cannot cross midnight; overlapping power-on takes priority over off, and the highest-numbered coincident schedule wins. Configure daylight-saving dates/correction rather than assuming automatic UK clock rules. USB Autoplay uses an autoplay folder; numbered playlists use playlist1 to playlist7, with supported photo/movie files and the relevant option enabled.
• Network, tiling and power-save setup: Use shielded CAT-5 Ethernet for the wired LAN control connection and select the required RS232/LAN control port. Remote control, TCP availability and Wake-on-LAN depend on the selected power-save mode. Tiling supports up to 150 sets (15 horizontal × 10 vertical) with configured matrix positions/frame compensation and daisy-chained control; RS232/IR loop-through is not a video-output connection. An external IR input disables the built-in remote sensor; select unique IDs when controlling several displays.
• Pixel tolerances and image retention: This is not a zero-defect panel guarantee. The manual lists acceptable limits of two lit subpixels, ten dark subpixels and twelve total dot defects; its note counts one or two adjacent subpixel defects as one dot. Warranty assessment depends on the actual local terms and exceeding the applicable tolerance. Mura and severe burn-in/after-images are excluded; use a moving screensaver/periodic refresh for static content, suitable backlight settings and temperature control. These precautions do not guarantee that Mura or image retention can never occur.
• Warranty scope and exclusions: The leaflet and manual’s rest-of-world table state three years, subject to local/sale terms, correct intended use and proof of purchase. A repair or equivalent refurbished replacement does not restart the original warranty. The manual excludes installation/setup labour and external-system work, consequential/data losses, external reception problems, unauthorised country adaptations and altered/illegible identifiers. Manufacturer cover is distinct from separately purchased extended cover; no extra years or guaranteed on-site service are implied.
• Handling, electrical safety and package scope: Use the supplied approved power lead and an earthed socket with an accessible disconnect; follow the manual’s UK plug/fuse requirements through a competent service person. Disconnect all cables before moving or cleaning, use a soft lint-free cloth and avoid solvents, oil, excess moisture and pressure on the panel. Servicing is for qualified personnel. Package contents vary by region; an optional stand, an illustrated peripheral or a menu option is not proof it is included. Remote batteries need correct polarity and safe replacement/disposal; do not mix types or old/new cells. Class A radio-interference and local WEEE/battery-disposal conditions apply.
• Energy test conditions: The manual names ENERGY STAR only for the 50- and 55-inch models and only at factory-default settings; picture changes or enabled features may exceed that test’s limits. It is not a certification claim for the 43-inch model or proof of current UK label status. Its on-mode, annual, standby and off-mode table figures use separately labelled test states, not guaranteed actual energy use or substitutes for the leaflet’s typical/maximum consumption.

Technical specifications