B-Tech BT8573/BB

Buying checks

• Screen and load limits: For screens up to 75 inches and a maximum supported load of 70 kg. Include attached equipment in the load calculation. VESA 600 × 400 mm requires the included adaptor arms; a maximum fixing envelope does not prove every smaller pattern.
• Confirm installation dimensions: B-Tech’s documents label the overall dimensions differently. Do not use the disputed height and depth labels to plan the installation; obtain confirmed dimensions for this exact stand before ordering for a height-restricted space.
• Shelves and cable management: Shelves and accessory collars are optional additions, not included AV equipment. The stand has integrated cable management, non-marking rubber feet and a cover plate for the grab handles; these do not remove the need to check floor capacity and stability.
• Qualified installation: Use a professional AV installer or another suitably qualified person. Read every instruction and warning, never use defective or missing parts, and do not exceed the specified load. B-Tech warns that improper installation or use can cause serious injury and invalidate its stated guarantees.
• Floor and installation position: Indoor use only. The installer must confirm floor capacity and stability, allowing for contact with people or objects and exposure to sudden wind. Keep public installations out of immediate reach and clear of passageways and emergency exits. If drilling is needed, avoid hidden cables and water or gas pipes.
• Screen screws and spacers: Choose the supplied screws, washers and spacers for the actual screen’s fixing depth. Recessed fixings require suitable spacers; fit both interface arms the correct way round using matching holes. The installer must confirm all supplied fixings are suitable rather than assuming a universal screw depth.
• Assembly and security screws: Follow the guide to fasten both poles to the base, position the cable holes to the rear, secure the four collars and mounting plate, and hook on the screen. Fit the safety screws underneath both interface arms after any lateral or height adjustment; a hook-on screen is not secured until those fixings are fitted.
• Landscape and portrait installation: The stand supports landscape and portrait mounting with the appropriate arm arrangement. Use the guide’s included adaptor-arm configuration for 600 × 400 mm fixings. The screen itself must also permit the proposed orientation; stand support does not establish the screen’s rotation or playback capability.
• Cables and ongoing inspection: Keep cables tidy and secure without obstructing adjustment, and avoid finger-trapping hazards during assembly or adjustment. Double-check every fixing immediately after installation and inspect the stand and fixing points at intervals no longer than six months.
• Guide measurements: The guide’s first page labels the overall size H.1826 × W.800 × D.600 mm, while its dimension illustration also shows different height references. These are not interchangeable with the datasheet’s disputed axis labels. The guide itself disclaims the accuracy of its information; obtain the exact required installation dimensions.
• Using the dimension drawing: The R00 drawing is in millimetres, with distinct base, pole, interface and screen-centre references. Do not treat these as one overall height. B-Tech does not guarantee the data’s accuracy, currency or suitability; confirm the dimensions needed for the actual installation before relying on the drawing.

Technical specifications