iiyama TF3215MC-B2 32-inch Interactive display

Buying checks

• Touch compatibility: Multi-touch requires a supported operating system. Check the intended host operating system and touch connection before ordering.
• Protection rating: The IP65 protection rating applies to the front of the display.
• Permitted mounting positions: Use the landscape or portrait rotation shown as available in the manual. The opposite portrait rotation and inverted landscape are marked not available. Face-up use is not established by this diagram; physical mounting is separate from media-player rotation.
• Mounting and handling: At least two people are required to move the display. Use a wall and mount strong enough for their combined load, following the mount instructions and using qualified service personnel. The manual specifies four M6 screws with 8.5 mm chassis insertion, allowing for the mounting-plate thickness; longer screws can contact internal electrical parts and cause damage or electric shock.
• Touch operating systems: The manual lists Windows 7/8/8.1/10 multi-touch with the Windows inbox driver; its XP note specifies single touch. Android 7.0 requires kernel 4.4, Android 6.0 kernel 3.18, Android 4.0–5.1 kernels 3.0–3.14, and Linux kernels 3.0–4.4 use the multi-touch driver. Legacy Mac OS 10.9–10.13 is listed as single-touch with version-specific gesture/driver instructions; the manufacturer supplies the driver and guide where specified. This table does not establish Windows 11 or current macOS support.
• Touch connection and supplied cables: Connect USB for host touch as well as the video signal cable, with both devices off while connecting; allow about 8 seconds after USB connection for touch to become ready. Use a protective-earth power connection and an accessible socket; the manual specifies a 120/240 V building circuit breaker rated at no more than 20 A. Use the correct signal cables: incorrect connections can damage the display and host, and poor-quality VGA/audio cables may cause interference. VGA, audio and DisplayPort cables are not included in the illustrated connection; a video connection alone does not carry touch.
• Brightness measurement scope: Typical brightness through the touch panel is 460 cd/m² for this exact model. The separate 500 cd/m² panel figure and 200 cd/m² default energy-saving setting are different measurement scopes, not alternative typical touch-display ratings.
• Touch modes and Windows limit: The 30-point maximum is the Normal-mode hardware figure, not every host or mode: the manual limits Normal mode on Windows to 10 points. Glove mode supports the stated +2 mm thickness and 5 points; Through-Glass mode supports the stated +6 mm thickness and 2 points. Power on and set Touch Switch only after installation; setting it before installation can cause calibration misalignment or malfunction.
• Continuous operation and image retention: The 24/7 rating is conditional on following the installation guidance in a clean, temperature-controlled environment. Avoid prolonged static images, use moving content or a moving screensaver, lower brightness and turn off when unused. The manual recommends active fan cooling for long operation or high ambient temperatures. For a retained image, switch off for as long as the preceding static image was displayed.
• Weight, power and environment: The manual lists 10 kg net product weight, not packaged shipping weight, and 32 W typical power with no USB devices connected. Operate at 0–40°C and 10–90% humidity, non-condensing; −20–60°C and 10–90% humidity are storage limits, not a wider operating range.

Technical specifications